Tyco Door Interface Unit DIU 210 Uživatelský manuál stáhnout pdf

www.cemsys.com

OVERVIEW

The Door Interface Unit (DIU 210) is designed primarily to provide power to a door

lock, as well as local power to a CEM reader when a high level of security is required.

It has onboard inputs which can be used to monitor conditions such as a ﬁre alarm or

activated Break-glass condition.

The DIU 210 improves door security, by allowing the installer to locate lock controls

on the secure side of a door, with an intelligent CEM reader on the unsecured side. The

DIU 210 communicates with an intelligent CEM reader over a single pair RS485 cable.

Upon a valid swipe at the card reader, the reader will instruct the DIU (over the RS485

communications channel) to activate the appropriate output to release the lock using a

coded data signal (i.e. coded lock).

As an added beneﬁt, the DIU 210 monitors the status of all standard door monitoring

inputs; inputs on an intelligent CEM reader are free for use as general purpose inputs

The DIU 210 is supplied in a steel enclosure complete with power supply backplane and

an output for an additional door holder.

DIU 210

• DoorInterfaceElectronics

held on one board

• Provides‘codedlock’serial

interface between door

hardware and card reader

• Onsiteselectablefor12Vor

24V lock output

• Firealarmandbreakglass

inputs for emergency door

release

• Designedforeaseof

installation and maintenance

using 2 part connectors

throughout

• CompliantwithEN55022

(emissions)andEN55024

(access control immunity)

• Backupbatteryconnectionfor

emergency power

FEATURES

DIU 210

Door Interface Unit

1. DIU Unit Enclosure

2. CEM Reader

3. Sounder

4. Break Glass Unit

5. REX/ Exit Reader or

Secure side push button

6. Door Holder

7. Door Lock

8. Lock Sense

9. DoorPositionsensor

1 2

Shrnutí obsahu

Strany 1 - Door Interface Unit

www.cemsys.comOVERVIEWThe Door Interface Unit (DIU 210) is designed primarily to provide power to a door lock, as well as local power to a CEM reader

Strany 2 - TECHNICAL SPECIFICATIONS

PHYSICALSize 300 x 250 x 150 mm (11.8 x 9.84 x 5.9in)Weight 4.3KgPower - Voltage 100-240VAC, 50/60Hz Current 0.6A (excluding locks and heads)

Komentáře k této Příručce

Žádné komentáře

Tyco Door Interface Unit DIU 210 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Tyco Door Interface Unit DIU 210. Tyco Door Interface Unit DIU 210 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Tyco Door Interface Unit DIU 210